Ph. D. A. Ingenito in April 2007 teacher at the second edition of the Master Course in “Space Exploration And Development Systems (SEEDS)” by Politecnico di Torino; since 01/2007 teacher “Airbreathing propulsion” at the “Aerospace Engineering School” of the University of Rome “La Sapienza”; works on moon vision-high mobility lunar vehicle studies; trainer for the course of expert in aeronautical technologies; since 2003 gives some lectures at the Course “Combustion for propulsive systems” at “Aerospace Engineering School”, University of Rome “La Sapienza”; since 2005 work on Long-Term Advanced Propulsion concepts and Technologies (LAPCAT) , FP6 Priority 1.4 Aeronautic and Space, issued by European Community Sixth Framework Programme; since 01/2005 works within the GDR-E (European research group) at "Energy and Safety of Hydrogen"; 2003–2005: works in ``Studies on the preparation, atomisation and combustion of nano-aluminium – water slurry, a novel “green” propellant for space applications’’, Ref. Nr. 03-53-5203, issued by INTAS; 2002 – 2003: works in ``Chemical Microrocket: Scaling and Performance Enhancement'', SPC 02-4034, Contract Order Number FA8655-02-M034, issued by EOARD (European Office of Aerospace Research and Development, Department of the Air Force); 02/2002-06/2002: works in “CFD analysis of numerical thermo-fluid dynamics” for CSM at University of Rome “La Sapienza”. The main research areas consist of: advanced space propulsion field, particularly in airbreathing propulsion and micro-thrusters; chemical kinetics, particularly relative to kinetics of combustion in gas phase for aviation fuel (both at low and high pressure), hydrocarbon cracking/reforming analysis for light species on board productions, and examination of rocket performance, charged species recombination analysis; aluminum and water combustion for space application; CFD (Computational Fluid Dynamics), particularly focused on turbulent reactive flows; at present developing a SGS model for reactive supersonic flows;   

Works published:

1. “Effect of the Turbulent Schmidt Number on Supersonic Regime”, A Ingenito, C. Bruno, J. Steelant, ISABE 2007, 2-7 September 2007, Beijing, China.
2. “Mixing and flame anchoring in a supersonic combustor”, A Ingenito, C. Bruno, J. Steelant, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Cincinnati, OH, 8-11 July 2007.
3. “Supersonic mixing and combustion: advance in LES modeling”, A Ingenito, C. Bruno, J. Steelant, EUCASS 2007, Brussels, Belgium, 1-6 July 2007.
4. "TVC Numerical simulations for a Power Generator Topping Cycle based on Hydrogen", A. Ingenito, L. Patrignani, C. Bruno, Italian Section of the Combustion Institute Meeting, Ischia, Italy, 21-23 June 2007.
5. “Advance in Supersonic Combustion Modeling and Simulations”, A. Ingenito, E. Giacomazzi, C. Bruno and Johan Steelant, 45th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, 8-11 January 2007.
6. “LES Modeling of Scramjet Combustion”, A. Ingenito, E. Giacomazzi, C. Bruno and Johan Steelant, 14th AIAA/AHI Space Planes and Hypersonic Systems and Technologies Conference, Canberra, Australia, 6-9 November 2006.
7. “A Novel Model of Turbulent Supersonic Combustion: Development and Validation”, A. Ingenito, G. De Flora, E. Giacomazzi, C. Bruno and Johan Steelant, 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Sacramento, California, 9 - 12 Jul 2006.
8. “LES Modeling of Scramjet Combustion”, A. Ingenito, G. De Flora, E. Giacomazzi, C. Bruno and Johan Steelant, 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, 9-12 January 2006.
9. “Effects of Catalisys and Fuel Cracking in Microrockets”, E. Giacomazzi, A. Ingenito, C. Bruno, submitted to Journal of Propulsion and Power.
10. “Using Aluminum for Space Propulsion”, A. Ingenito and C. Bruno, AIAA paper, Vol. 20, No. 6, Journal of Propulsion and Power, Copyright Clearance Center, Danvers, November-December 2004.
11. “ Les of Supersonic Combustion of H2/vitiated air”, A. Del Rossi, A. Ingenito, V. Parisi, E. Giacomazzi and C. Bruno, paper presented at the 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Fort Lauderdale, Florida, 11-14 July 2004.
12. “Catalysis and Cracking for Microrocket Application”, E. Giacomazzi, A. Ingenito and C.Bruno, paper ISTS 2004-b-45, presented at the 24th Int. Symp. on Space Technology and Science, Miyazaki, Japan, May 30-June 2, 2004.
13. “Evaluation of the Combustion Process in the Mass Injection Precompression Cooling Engine”, V. Balepin, C. Bruno and A. Ingenito, Paper ISABE 2003-1127, presented at the XVI ISABE Conference, Cleveland, OH, Sept. 2003.
14. “Cracking of Methanol for Microrocket Applications and Scaling Analysis”, C. Bruno, A. Ingenito and E. Giacomazzi, Proceedings of the AIDAA XVII National Congress, edited by M. Marchetti, ESAGRAFICA Press, Rome, 2003.
15 “Chemical MicroRocket: Scaling and Performance Enhancement”, C. Bruno, E. Giacomazzi, A. Ingenito, final report to EOARD, Contract Order Number FA8655-02-M034, 2002. 16. “Using Powdered Aluminum for Space Propulsion”, C. Bruno, A. Ingenito and F. Cuoco, Proceedings of the “18th International Workshop on Rocket Propulsion: Present and Future”, Pozzuoli, 16–20 June 2002.